| Place of Origin: | Yuyao, Zhejiang, China |
| Brand Name: | FOLK Tools |
| Certification: | ISO, BSCI, GS, CE, CB, ROHS, UL, ETL |
| Model Number: | 40# A5 |
| Minimum Order Quantity: | 100 pcs (each piece is one matched pair of cutter + comb) |
|---|---|
| Price: | Negotiable |
| Packaging Details: | 100 pcs / 1 carton; carton size 38*23*27cm; N.W./G.W. 7/8KG |
| Delivery Time: | 7-15 days |
| Payment Terms: | T/T, L/C, Western Union |
| Supply Ability: | 50,000 pcs per Month |
| Model: | 40# | Cutting Height: | 0.25mm (1/100 Inch) |
|---|---|---|---|
| Blade System: | A5 Detachable, Two-piece (comb + Cutter), Fine-pitch Full Tooth | Format: | Standard Width, Full-tooth Comb |
| A5 Zone: | Finest Practical Cut; Veterinary And Surgical Prep | Lower Comb: | Full-tooth Stainless Steel, Matched To 0.25mm |
| Upper Cutter Options: | Stainless Steel Or Ceramic | Compatibility: | Andis, Oster, Wahl, Heiniger A5 Clippers |
| Application: | Surgical Prep, Imaging Prep, Faces, Pads, Ears, Bridle Paths, Show Detail | Sold As: | One Pair (1 Upper Cutter + 1 Lower Comb) |
| OEM: | Logo On Blade, Custom Blister Card, Bulk Carton | ||
| Highlight: | A5 horse clipper blade,0.25mm stainless steel comb,ceramic cutter clipper blade |
||
The 40# is the first blade in the A5 range that most groomers never need — and the one veterinary clinics reach for every day. It leaves 0.25 mm of coat, half of what a 30# leaves, which is close enough that the blade is running on skin rather than through hair. This page explains what a quarter of a millimetre actually is, which jobs justify a 40# A5 horse clipper blade, why it is not a surgical scalpel, and how to run one without nicking skin or leaving a clipper burn.
Blade charts are easy to read and hard to feel. The 40# leaves 0.25 mm of coat, which is roughly two to four human hairs laid side by side, and half the stubble left by a 30#. On the animal that does not read as a very short clip; it reads as bare skin with the grain of the skin showing through.
| Reference | Thickness |
|---|---|
| Human hair (single strand) | About 0.06–0.10 mm |
| Sheet of office paper | About 0.10 mm |
| Coat left by the 40# | 0.25 mm (1/100″) |
| Coat left by the 30# | 0.50 mm (1/50″) |
| Credit card | About 0.76 mm |
| Coat left by the 15# | 1.2 mm (3/64″) |
Two consequences follow. First, there is no fibre left to cushion the comb, so the blade is effectively running on skin. Second, there is almost no coat to carry heat away from the cutting edge, so the comb heats faster than at any other setting in the range. Every technique note below comes back to those two facts.
The 0.25 mm figure is nominal: it is the gap between the comb teeth and the skin when the blade is held flat and the skin is taut. Press the head down, run a bent comb, or work loose skin and the real cut will be shorter — and the risk of a nick goes up.
An A5 range is a sequence of cutting heights. Each step down removes a cushion of coat that the next blade has to work without, and between the 30# and the 40# that cushion is only 0.25 mm — but it is the half-millimetre that separates a detail blade from a clinical one.
| Blade | Cutting height | Typical job |
|---|---|---|
| 9# | 2 mm | Close finishing with some cover |
| 10# | 1.5 mm (1/16″) | The standard working blade on most A5 clippers |
| 15# | 1.2 mm (3/64″) | Faces, legs, lines and show finishing |
| 30# | 0.5 mm (1/50″) | Faces, ears, pads, sanitary areas and surgical prep |
| 40# (this blade) | 0.25 mm (1/100″) | Surgical and veterinary prep, show faces and pads, fine pattern work |
| 50# and finer | Below 0.2 mm, brand-dependent | Specialist clinical work; not a routine grooming blade |
The 40# is the finest blade most A5 clippers are routinely asked to run. It is not a smoother version of a body blade: it is a different class of tool, used in a different room, for a different purpose. If your work is full-body clipping, the 40# is not the upgrade you are looking for.
At 0.25 mm the blade is cutting against skin, so the jobs it suits are the ones where the skin has to be visible, clean and hair-free — and where the person holding the clipper can keep the skin taut and the blade flat.
| Area or job | Why the 40# works there |
|---|---|
| Veterinary surgical site prep | Clipping hair around an incision, an IV catheter site, a drain or a wound edge so the field is hair-free. A 40# gives the closest uniform finish on taut, healthy skin. It removes hair; it does not sterilise the site. |
| Imaging and scan prep | Ultrasound, X-ray and scan work where hair-free skin contact matters and a 30# still leaves enough stubble to interfere. |
| Wound management | Clipping around a wound — never into it — so hair does not sit under a dressing or contaminate the area. |
| Poodle faces, feet and throat | Where a 30# still leaves visible stubble and the skin is healthy, a 40# gives the clean, tight finish some show standards ask for. The standard-width comb follows the muzzle without rocking. |
| Terrier cheeks, ears and pattern lines | Crisp edges and tight pattern work where a longer blade would blur the outline. |
| Horse face, muzzle, ears and bridle path | Whiskers, jawline, the hollow under the eye and the inside of the ear flap. Horse skin is thin: use light passes and keep the blade flat. |
| Show touch-ups | Small areas only, after the body is finished with a coarser blade. |
Not a surgical blade. A 40# clipper blade cuts hair, not skin. It is not sterile, it is not a scalpel, and it must never be used to open tissue. Veterinary clinics use it to prepare a field before their own antiseptic and sterile protocols; the clipper blade is only the hair-removal step.
Groomers often ask whether the 40# is simply “the 30#, but closer”. In cutting height it is exactly that — half the number, half the coat — but in use it is a different decision.
| 30# | 40# | |
|---|---|---|
| Cutting height | 0.5 mm (1/50″) | 0.25 mm (1/100″) |
| Coat left | A light shadow | Essentially none |
| Typical user | General groomer, show groomer, clinic | Veterinary clinic, specialist show groomer |
| Typical job | Faces, ears, pads, sanitary, detail, prep | Surgical prep, imaging prep, show faces and pads, fine patterns |
| Margin for error | Small | Smallest in the A5 range |
| Heat on skin | Fast | Fastest |
| Best default | The blade to own first | The blade to add only when the job calls for it |
The working rule: if the job is not surgical or imaging prep, or a show finish where 30# stubble is unacceptable, stay with the 30#. A 40# is not “better”; it is more specialised, and it asks more of your technique.
An A5 blade is two parts working as one gauge. The lower comb is a row of teeth with a fixed height: it lifts the coat and holds the skin away from the cutting edge. The upper cutter oscillates across the comb and severs whatever hair stands above it. The cutter never touches the skin — the comb decides the length.
Going from a 30# to a 40# changes only one variable: the comb is ground to a lower height, and its tooth pitch is finer. The clipper, the cutter style and the mounting are the same. That is also why the two parts must stay matched — a 30# cutter on a 40# comb will not tension or cut correctly, and a 40# comb on a worn cutter will pull instead of cut.
Because the tooth pitch is finer, each stroke takes a smaller bite. A 40# feeds more slowly than a 30#. Pushing harder does not make it cut faster; it loads the teeth, builds heat and leaves tram lines on bare skin. Let the blade work at its own rate and overlap each pass by about a third.
Every 40# pair ships with a stainless steel comb. The upper cutter is the only specification decision, and at 0.25 mm it matters more than on any coarser blade, because heat is the main risk.
| Ceramic cutter | Stainless steel cutter |
|---|---|
| Runs cooler, keeps its edge longer in clean coat, and is the usual choice for faces, pads and long surgical-prep sessions. Brittle: a drop on a hard floor or a run through a dirty coat can chip the edge. | Tougher in coarse, sandy or yard conditions, cheaper to replace and more forgiving of knocks. Runs warmer, which is noticeable on close work over large areas. |
How to choose: clean coat, sensitive skin and long sessions — ceramic. Working yard, coarse coat, mixed conditions or the lowest running cost — stainless steel. Many clinics keep both and swap when the blade warms.
Almost every complaint about a 40# blade is really a complaint about heat, pressure or loose skin. All three are controllable.
The blade is machined to A5 dimensions — hinge slot, mounting rail, cutter fork and tension point — so it seats on the heads the main brands have supported for years:
If the head takes any other A5 blade, it will take this one. Livestock shears and the Oster 76 series are a different system and are not compatible.
| Blade system | A5 detachable, two-piece (comb + cutter), fine-pitch full tooth |
|---|---|
| Model | 40# |
| Cutting height | 0.25 mm (1/100″) |
| Format | Standard width, full-tooth comb |
| Zone | Surgical and veterinary prep, show faces and pads, fine pattern work |
| Supplied as | One pair: 1 upper cutter + 1 lower comb, packed together |
| Lower comb | Full-tooth stainless steel, ground and hardened to the 0.25 mm setting |
| Upper cutter options | Stainless steel or ceramic, both matched to the 40# comb |
| Compatibility | Andis, Oster, Wahl and Heiniger A5 clipper heads |
| Typical use | Surgical site prep, imaging prep, faces, pads, ears, bridle paths and show detail |
| Packaging | 100 pcs / 1 carton; carton size 38×23×27 cm; N.W./G.W. 7/8 kg |
The 40# sits at the fine end of a full A5 range that runs from 3F through 40#, plus the A-Series and H-Series formats for other clipper systems. Same factory, same steel and the same grinding process across the range, so a 15#, a 30# and a 40# from FOLK can be used side by side on the same animal without a change in feel.
| Minimum order | 100 pcs (each piece is one matched pair of cutter + comb) |
|---|---|
| Packaging | 100 pcs / 1 carton; carton size 38×23×27 cm; N.W./G.W. 7/8 kg |
| OEM options | Logo on the blade, custom blister card, bulk carton |
| Lead time | 7–15 days |
| Supply ability | 50,000 pcs per month |
| Payment terms | T/T, L/C, Western Union |
Yes. A 40# leaves 0.25 mm (1/100″), half the 0.5 mm left by a 30#. It is the next step down the A5 ladder and the finest blade most A5 clippers are routinely used with.
Surgical and veterinary site prep, imaging prep, clipping around wounds, show faces and pads, and fine pattern work. It is a clinical and detail blade, not a body blade.
No. A surgical blade is a sterile instrument that cuts tissue. A 40# A5 blade is a clipper blade that cuts hair to 0.25 mm. It is not sterile and must never be used to open skin.
No. At 0.25 mm there is no coat left to protect the skin, and the blade runs directly on it. Use a coarser blade for the body and keep the 40# for prep and detail work.
A 50# is finer still — below 0.2 mm on most charts, and the exact figure varies by brand. It is specialist clinical tooling. The 40# is the practical surgical-prep blade and the finer of the two that most clinics keep on the shelf.
Because there is almost no coat left to carry heat away, and the blade is in direct contact with skin. Check it on the back of your hand, keep it oiled, and swap to a second blade rather than pushing through.
Ceramic runs cooler and holds its edge in clean coat, which suits faces and surgical prep. Stainless steel is tougher in coarse or dirty conditions and cheaper to replace. Many clinics keep both.
It fits any A5 clipper head, including Andis AGC and UltraEdge, Oster A5 and Turbo A5, Wahl KM2/KM5/KM10, and Heiniger A5-compatible models. It does not fit livestock shears or the Oster 76 system.
It is not a blade to hone by hand. Fine-pitch A5 blades need a proper blade service with the right fixture. If the blade pulls or leaves lines, send it out or replace the cutter.
One matched pair: one upper cutter (stainless steel or ceramic) and one lower stainless steel comb, packed together. The clipper and head are not included.
Only in a veterinary prep context. Cat skin is thin and tears easily, and a 40# leaves no coat to protect it. It is not a blade for a lion clip or a full-body cat groom.
Yes. Logo on the blade, custom blister card and bulk cartons are available from 100 pcs per order. Send the artwork and the target packaging format with your inquiry.
Tell us the cutter you need — ceramic or stainless steel — the quantity and the packaging format. We will confirm the blade spec, the carton and the lead time.
Contact Person: Ms. Rena Guo
Tel: 15990551630
Fax: 86-0574-22676588