H-Series · Heiniger Compatible
H1 Horse Clipper Blade — 1mm Cutting Height, 15-Teeth Cutter, 31-Teeth Comb
The H1 is the close-clipping blade of the H-Series: a 1 mm cut, a 15-teeth cutter and a 31-teeth comb in carbon steel, built to fit Heiniger horse clippers. It is the blade for a clean, short finish — show turnout, a full clip on a horse in hard work, or tidy hygiene clipping — where a longer coat blade would leave too much hair behind.
H1 1 mm H-Series horse clipper blade. 15-teeth cutter, 31-teeth comb, carbon steel, compatible with Heiniger’s clippers.
Where the H1 belongs in a clipping kit
A 1 mm cut is a genuine short clip, so the H1 is chosen for finish rather than warmth. Its natural jobs are:
- Show and competition turnout. A close, even coat that shows muscle definition and takes rug and tack cleanly.
- Full clip on a horse in hard work. Horses in regular training that are stabled and rugged benefit from a short body clip that lets them cool down and dry quickly.
- Hygiene and veterinary clipping. Short work around the neck, chest and belly where hair has to be taken right down and kept clean.
- Finishing after a longer blade. Many grooms take the bulk off with a longer blade, then finish with the H1 for a uniform surface.
- Tidy legs and body lines. The 31-teeth comb covers ground quickly, while the 15-teeth cutter keeps the cut clean rather than ragged.
Not a winter blade. At 1 mm the H1 removes the coat’s insulation. It suits clipped, stabled and rugged horses in work; for horses living out in cold weather, use a longer blade that leaves coat on the horse.
Specifications
| Model | H1 |
|---|
| Blade series | H-Series, compatible with Heiniger’s horse clippers |
|---|
| Cutting height | 1 mm |
|---|
| Cutter | 15 teeth |
|---|
| Comb | 31 teeth |
|---|
| Material | Carbon steel |
|---|
| Typical use | Close body clip, show turnout, full clip for horses in work, hygiene clipping |
|---|
| Packaging | 100 pcs / 1 carton; carton size 38×23×27 cm; N.W./G.W. 17/18 kg |
|---|
Carbon steel: sharp, and worth looking after
Carbon steel takes a keen edge, which is why it is used for close-cutting blades that have to shear cleanly rather than pull. It also needs basic care to stay that way:
- Clean and dry after every clip. Brush hair out of the teeth, wipe the blade, and do not store it wet.
- Oil the cutter and comb. A few drops of clipper blade oil at the start of a session and every ten minutes of running keeps friction and heat down.
- Keep the tension correct. A loose cutter wears the comb and leaves tracks; an over-tightened cutter runs hot and dulls quickly.
- Check for rust before storage. Carbon steel is tougher than it looks but not rust-proof; a light film of oil protects the edge between seasons.
Compatible with Heiniger clippers and the FOLK H-Type head
The H1 is built to the H-Series dimensions used by Heiniger horse clippers, so it seats and tensions correctly on the machine rather than being forced into place. It also fits the FOLK H-Type clipper head, which accepts H1 blades and is itself compatible with Heiniger blades — useful for distributors who want one head and a choice of blade sources.
H1 blade on the FOLK H-Type clipper head. The head accepts H1 blades and is also compatible with Heiniger’s blades, giving buyers a second supply route.
H1 blade with FOLK clippers. The same blade body runs across the FOLK clipper range fitted with the H-Type head.
One blade in a complete H-Series
The H1 is not a stand-alone item. The H-Series covers close and mid-length clipping on Heiniger-compatible machines, so a retailer can offer a short blade for show work and a longer blade for coat without changing clipper brand.
The H-Series range. H1 with a 1 mm cut, and H3 and H6 with 3 mm cuts and different comb widths — all compatible with Heiniger’s horse clippers.
For the face, ears, bridle path and other tight areas, a narrower H-Series blade such as the H6 is easier to control than the wide 31-teeth H1 comb. Match the blade to the area rather than forcing one blade across the whole horse.
Wholesale, OEM and packaging
Ningbo FOLK Tools manufactures electric sheep shears, horse clippers, pet clippers, replacement blades and blower dryers. The H1 is produced in our own plant with controlled tooth grinding and hardening, and is available with your logo on the blade, your own blister card or bulk carton. Blades, clipper heads and spare parts can be supplied together so distributors can support the full machine.
| Minimum order | 100 pcs |
|---|
| Packaging | 100 pcs / 1 carton; 38×23×27 cm; N.W./G.W. 17/18 kg |
|---|
| Delivery time | 7–15 days for stock blades; artwork approval and printing add time for private label |
|---|
| Supply ability | 50,000 pcs per month |
|---|
| Payment terms | T/T, L/C, Western Union |
|---|
| Certification | ISO, BSCI, GS, CE, CB, ROHS, UL, ETL |
|---|
Frequently asked questions
What is the H1 blade used for?
The H1 is a 1 mm close-clipping blade for Heiniger-compatible horse clippers. It is used for show turnout, a full clip on horses in hard work, hygiene clipping and finishing a clip to a short, even surface.
Which clippers does the H1 fit?
It is built for Heiniger’s horse clippers and also fits the FOLK H-Type clipper head, which accepts H1 blades and is compatible with Heiniger blades. Confirm the machine uses the H-Series blade system before ordering.
What is the difference between the H1, H3 and H6?
All three are H-Series blades. The H1 cuts at 1 mm with a 15-teeth cutter and 31-teeth comb for close work; the H3 and H6 cut at 3 mm with different comb widths, so they leave more coat and suit different areas of the body.
Is carbon steel suitable for professional use?
Yes, provided the blade is cleaned, dried and oiled after use and the tension is set correctly. Carbon steel takes a sharp edge; routine care is what keeps it cutting cleanly and prevents rust.
Can I order private-label packaging?
Yes. Logo on the blade, custom blister card and bulk carton are available. Minimum order is 100 pcs, with packaging artwork approval required before production.
Do you produce other H-Series models?
Yes. The H-Series includes the H1, H3 and H6, and we can supply them together so distributors can offer a complete Heiniger-compatible blade range from one factory.
Add the H1 to your Heiniger-compatible range
Ask Ningbo FOLK Tools for a sample, a dimension drawing and a wholesale quotation for the H1 carbon steel horse clipper blade, with your own logo and packaging.
Contact Ningbo FOLK Tools →
Your message must be between 20-3,000 characters!
