13-Teeth Straight Comb Sheep Clipper Blade in High-Carbon Steel for Sheep Shearing Comb Use

Designed for shearers who need consistent entry and clean cutting across dense and demanding fleece types, the SM-13S 13-teeth straight comb is a high-carbon steel sheep shearing comb engineered for daily farm and professional shearing use. It is manufactured by Ningbo FOLK Tools, a supplier with a long-standing presence in animal clipper and shearing combs production. This 13-tooth shearing blade pairs with the SC-4A cutter (4 mm height) and is built to run on corded, corded speed-adjustable, double-head, and battery-powered sheep clippers.

The 13-tooth straight configuration sits in a practical middle ground between coarse, low-tooth combs and fine show combs. With roughly 7 mm tooth spacing, this 13-tooth straight comb is optimized for entering denser, thicker wool without the aggressive bite of a coarse comb, while still leaving an acceptably smooth finish. The high-carbon steel construction delivers the hardness and wear resistance that clipper blade parts buyers expect from a sheep cutter blade used under continuous load. Heat treatment and precision grinding keep the tooth tips aligned and sharp, reducing the pull-and-tug that dull or poorly ground shearing combs create on the fleece.

The straight tooth line is a multipurpose profile. Unlike a flared comb, which gathers extra wool to one side for speed, the straight 13-teeth straight comb tracks evenly across the body and suits shearers who want predictable control across different sheep breeds and body areas. For buyers sourcing sheep shearing blade 20 teeth or 20-tooth shearing blades for coarser work, the SM-13S serves as the denser-wool companion in the same blade family.

Farm-supply distributors, grooming wholesalers, and sheep farm equipment buyers typically evaluate a comb for sheep shearing machine applications on four points: tooth count and tooth spacing relative to the wool type, material hardness and heat resistance, compatibility with the handpiece, and whether the clipper blade can be re-sharpened reliably. The SM-13S addresses these directly: 13 teeth with tight spacing for controlled entry into thicker fleece, high-carbon steel for edge retention, broad compatibility across common electric sheep clipper and sheep shearer handpieces, and a geometry that supports repeat sharpening without premature tooth loss.

This is also where RFQ conversations tend to focus. Buyers sourcing sheep shearing combs and clipper blade parts in volume commonly ask about MOQ, lead time, and whether private-label or custom packaging is available. For standard catalog 13-tooth shearing blade items, MOQs typically start at 500 pieces, with OEM or custom-branded orders often requiring 1,000–3,000 pieces. Standard lead times run 15–20 business days after payment, while OEM orders generally require 30–45 days depending on quantity and customization. Compatibility confirmation is another recurring RFQ point: buyers should confirm their sheep shearing machine handpiece model before ordering, especially when switching from another shearing comb or clipper blade profile.

The bevel is the ground angle and effective length at the tip of each comb tooth. It controls how the sheep shearing comb enters the fleece. The general rule across the shearing industry is straightforward: the higher the bevel number, the longer and more "sledgy" the tooth tip, and the easier the comb enters dense wool. A shorter bevel is more rounded and glides on softer-skinned sheep with less risk of cutting, but it rides out of dense fleece instead of sitting down on the skin.

Among these, 5 mm is the most common bevel for general-purpose sheep shearing comb use, with 6 mm widely used for denser wool and 3 mm reserved for softer or more open fleece where a rounded entry is preferred. The SM-13S is available with 3 mm, 5 mm, 6 mm, or 7 mm bevel so distributors can stock one 13-tooth straight comb platform and cover multiple wool types and shearing conditions without adding separate blade SKUs.

The SM-13S is designed as a sheep shearing comb cutter blade replacement for common electric sheep shears and sheep clipper machine handpieces. It works alongside the SC-4A cutter and is suitable for sheep hair cutting machine, wool machine, and general animal clipper setups where a 13-tooth straight comb for sheep shearing machine is specified. For buyers building a complete blade program, the SM-13S complements coarser options such as 20-tooth shearing blades, 23-tooth sheep comb, and 30 blade for shearing, while remaining the denser-wool alternative to lower-tooth sheep shearing blade profiles. As a clippers blade replacement component, it also fits into broader clipper blade parts and shearing combs assortments for farm-supply and grooming distributors.